SHOP
  • Dealers
http://www.cammomusic.org/main Klonopin drugs.com http://www.wellsborotackleshack.com/index.php/online-purchase Anxiety http://eaca.net/listing/ http://eaca.net/lib/ http://eaca.net/homepage/ Diazpeam panic attack
Hardness tester LD3000
  • Hardness tester LD3000
  • Hardness tester LD3000
  • Hardness tester LD3000
  • Hardness tester LD3000

Hardness tester LD3000

€9,500.00
LD3000:



Accessories:






Automatic Hardness Tester. Brinell indentation. Conforms to ASTM E10, ISO 6506 Standards. Load cell with Closed Loop system (Pat. AFFRI). Test load range from 10 to 3000 kgf. ** From our showroom **.


LD3000 is an extremely accurate hardness tester:

- Load forces are applied directly on the measuring axis through load cells and are electronically controlled in "Closed Loop" (Pat. AFFRI) with a frequency of 1 kHz (1000 input per second).
- When testing unstable samples or deflective parts, the measuring head will follow the sample without losing contact with its 30 mm / 1.2" stroke.
- Results are not affected by any structural deflection, misalignment or vibration.
- Accurate measurements, even on the first test, eliminates the need for repeated tests. The R&R data is at the top of its class.
- The LD 3000 measuring head is fully motorized with a vertical sliding stroke of 30 mm / 1.2" (Total vertical capacity 150mm / 6". Removing the elevating screw, the vertical capacity increase till 300 mm / 12").
- Vertical capacity of 150 mm / 6" with a vertically sliding work table capable of bearing masses up to 3000 kg which allows for steady hardness measurements on bulky or irregular pieces.
- The activation of the test cycle is automatic; it starts when the head makes contact with the specimen which is automatically recognized at any position within the 30 mm / 1.2" of vertical stroke.

FULLY AUTOMATIC CYCLE:
Just push the start button and the head moves down performing the hardness test cycle in automatic succession without breaching a phase:
1. Automatic contact with the specimen
2. Automatic clamping and activation of the reference surface point
3. Automatic loading
4. Automatic return stroke at programmed distance.
Fully motorized and automatic, the test is not affected by operator influences and can easily be used by operators of every level.

FORCE RANGE
Brinell: 98.07 - 147.1 - 294.2 - 306.5 - 612.9 - 1839 - 2452 - 4903 - 7355 - 9807 - 29421 N
(10 - 15 - 30 - 31.2 - 62.5 - 187.5 - 250 - 500 - 750 - 1000 - 3000 kgf)
Vickers/Knoop: 98.07 - 147.1 -294.2 - 490.3 - 980.7 N (10 - 15 - 30 - 50 - 100 kgf)

FEASIBLE TESTS (Generate indentation only):
Brinell: 1/10 - 1/30 - 2.5/62.5 - 2.5/187.5 - 5/25 - 5/62,5 - 5/125 - 5/250 - 5/750 - 10/100 - 10/250 - 10/500 - 10/1000 - 10/1500 - 10/3000
Vickers/Knoop: HV 10 - HV 20 - HV 30 - HV 50 - HV 100

TECHNICAL DATA
Accuracy : Better than 0.5 %
Temperature Range: From 10 °C to 35 °C
Data Output : RS232 C Standard / USB and Ethernet as Optional
Power Supply: 110 or 220 V / 50÷60 Hz - Compressed air 5 ATM
Software: OMAG / AFFRI
Principle Of Operation: Load Cell and Closed Loop (Affri patent)
Conformity Standards: EN-ISO 6506 / EN-ISO 6507 / EN-ISO 6508 / ASTM E-10 / ASTM E-18 / ASTM E-384 / ASTM E-92 / ASTM E-103
Reading: LD 3000 - Indentation reading through standard microscope or through optional electronic microscope with auto-measure
LD 3000 A - Automatic Brinell HBW with on-board LCD touchscreen and portable camera probe.
LD 3000 B - Direct depth hardness measurement Brinell HBTW and Rockwell.
Head Stroke: 30 mm / 1.2"
Height Capacity 150 mm / 6" - Removing the elevating screw, the vertical capacity increase till 300 mm / 12"
Depth Capacity: 190 mm / 75"
Tolerable Weight: 3000 kg
Fields Of Use: For all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys.

Dimension (L x W x H) 140 x 100 x 65 Centimetre
Weight 350 Kilogram