RSDMAG
  • Dealers
http://www.cammomusic.org/main Klonopin drugs.com http://www.wellsborotackleshack.com/index.php/online-purchase Anxiety http://eaca.net/listing/ http://eaca.net/lib/ http://eaca.net/homepage/ Diazpeam panic attack
Portable Rockwell hardness tester RSDMAG 

RSD MAG

Portable hardness tester with magnetic clamping base for Rockwell, Superficial Rockwell, Brinell and Vickers methods. The first portable hardness tester that conforms to ASTM E-18 E-10 E384 and ISO 6508 6507 6506 international hardness standards. RSD MAG is a digital portable hardness tester with a manual drive for an automatic test cycle with hardness direct reading. Thanks to its magnetic clamping base it is possible to perform hardness tests on very bulky samples directly in the production department. It is completely uninfluenced by direction so that it is operative up to 360° degrees of positioning, even upside down. Load forces are applied through a dynamometric load cell which eliminates problems associated with dead weight systems on traditional testers. It is not affected by any external source of vibration, and it does not need to be leveled. Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis. LCD screen, user friendly interface, real time statistics and graphs and large archive storage. This hardness tester ensures the highest accuracy and repeatability at every measurement. Hardness tests in laboratory or in loco on tubes, profiles, valves and bulky or small pieces. For all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing.
Portable Rockwell hardness tester RSDMAG wheel   Portable Rockwell hardness tester double magnet   Portable Rockwell hardness tester superficie flat surfaces   Durometro portatile durezza Rockwell bottle   Durometro portatile durezza Rockwell wall   Durometro portatile durezza Rockwell 360
 
 

Test loads: from 3 to 187,5 kgf (from 29,42 to 1839 N)

Rockwell ISO 6508 / ASTM E-18: HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR  /  HRN - HRT

Brinell HBWT ISO 6506 / ASTM E-10: HB 30 - HB 10 - HB 5 MPa (F/D2)

Vickers ISO 6507 / ASTM E-384 (Only indentation): HV3 - HV10 - HV15 - HV30 - HV60 - HV100


 

 

User friendly:

Portable Rockwell hardness test in production departmentPulling one single start lever the hardness result will appear in a few seconds. It is so simple and easy to use that there is no need for any particular preparation by the operator:
  1. Identify the test area and place the hardness tester on the sample, no matter the size or geometry
  2. Locking the base lever the magnet will strongly adhere to the test piece for the entire test cycle
  3. Start the test and in 4 seconds the result will appear on the display scale or dial gauge
Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis. This hardness tester ensures the highest accuracy and repeatability at every measurement.
 

The AFFRI System

Hardness tester Closed LoopLoad forces are generated by a dynamometric load cell wich assures long term accuracy and eliminates problems associated with dead weight systems on traditional testers. Results are not affected by any structural deflection, misalignment or vibration.

Repeatability and reproducibility

Hardness tester repeatability and reproducibilityAccurate measurements on the first test, even in extreme conditions, will eliminate the need for repeated tests. The R&R data is at the top of its class.
 
 

Software RSD

The software controls the whole instrument during the entire cycle avoiding operator errors:
Rockwell softwareSet of the hardness test method
Rockwell software1Measurement settings
Rockwell software2Storable and printable statistics
Rockwell Integral software3Results, averages and conversions
 
 

From portable to bench-top

To convert the RSD MAG from a portable to regular bench top hardness tester, based on your needs, it can be combined with two different size of stand support, 670H or 460L. This system fully conforms to hardness testing standards and allows testing in laboratory on small pieces and prepared samples without the need uf buying another hardness tester. Hardness measurements will result fast and easy as an AFFRI bench tester including the sample clamping system and the auto compensation of deflection thank's to indenter and clamping hood vertical stroke.
From portable to bench top

Clamping system

Portable Rockwell hardness test on gearsAccurate hardness measurements even on unstable, dirty or oily samples. The clamping hood applies constant pressure and prevent from accidentaly samples movements during the test cycle.

50 mm of indenter and clamping hood stroke

Portable Rockwell hardness tester RSDMAG corsaThe measuring head follows the sample even in case of structural deflection. Easy and fast hardness measurements on different thicknesses without acting on the elevating screw.
 
 

Hardness tester models:

Durometro Portatile Durezza Rockwell RSDMAG 30
RSDMAG/30-D2
RSDMAG/30-D4

Durometro Portatile Durezza Rockwell RSDMAG 50
RSDMAG/50-D2
RSDMAG/50-D4

Durometro Portatile Durezza Rockwell RSDMAG 55
RSDMAG/55-D2
RSDMAG/55-D4

Durometro Portatile Durezza Rockwell RSDMAG 70
RSDMAG/70-D2
RSDMAG/70-D4

Durometro Portatile Durezza Rockwell RSDMAG 80
RSDMAG/80-D2
RSDMAG/80-D4

 

Components:

Durometro Portatile Durezza Rockwell RSDMAG base1
SMX30
300mm magnetic base for HR/HB measures up to 20mm sample’s thickness

Durometro Portatile Durezza Rockwell RSDMAG base2
SMX50
500mm magnetic base for HR/HB measures less than 20mm sample’s thickness

Durometro Portatile Durezza Rockwell RSDMAG base3
SMX55
Magnetic base with 10mm horizontal stroke sliding head for multi indentation

Durometro Portatile Durezza Rockwell RSDMAG base4
SMX70
Double magnetic clamping base for big or small diameters round shape samples

Durometro Portatile Durezza Rockwell RSDMAG base5
SMX80
Chain clamping base for non ferrous samples

Durometro Portatile Durezza Rockwell RSDMAG 670H
670H
High stand support:
Height capacity 390 mm
Depth capacity 232 mm

Durometro Portatile Durezza Rockwell RSDMAG 460L
460H
Regular stand support:
Height capacity 180 mm
Depth capacity 204 mm

Durometro Portatile Durezza Rockwell RSDMAG testa
Tester head:
RSDMAG-D2
588,4-1839 N (60-187,5 kgf)
RSDMAG-D4
147,1-441,3 N (15-45 kgf)

 

 

N.B. The RSDMAG head can be assembled, as it is, on any of our manual hardness terster’s stand supports (206/330/331).
See stand supports...

 

Tecnical features

 
RSDMAG D2
RSDMAG D4
Standards
EN-ISO 6506 / EN-ISO 6508 / ASTM E-18 / ASTM E-10
Indenter and clamping hood stroke
0/50 mm
Preload
RSD: 98.1 N (10 kgf)
RSD: 29.42 N (3 kgf)
Test loads

Rockwell: 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf) 

Vickers: 98.07 - 980.7 N (10 - 100 kgf)

Brinell: 98.07 - 612.9 - 1226 - 1839 N - On request 2452 N
(10 - 62.5 - 125 - 187.5 kgf - On request 250 kgf)

Superficial Rockwell: 147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)

Vickers: 29.42 - 294.2 N (3 - 30 kgf)

Brinell: 153.2 - 294.2 - 306.5 N (15.625 - 30 - 31.2 kgf)

Feasible tests
Rockwell: HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR
Superficial Rockwell: HRN + HRT
Brinell (On request): HB30 - HB10 - HB5 - HB2.5 MPa (F/D2)
Vickers (On request) (Only indentation): HV3 - HV10 - HV30 - HV100
Accuracy
Better than 0.5 %

REQUEST A FREE QUOTE TODAY!

Fill in the form below and we'll get back to you as soon as we can! Please fill in all required fields.
captcha
Ricarica
All information provided will be kept confidential. We will not disclose your personal information to a third party.