HARDNESS TESTERS FOR CONSTRUCTION INDUSTRY

Hardness testers for construction industry: mining machinery, components and extraction tools.

The industry of construction, mining, earth moving, demolition and agricolture needs a wide supply of tools and wear parts. The hardness test is a critical indicator of quality, strength, toughness, durability and bendability.
There are many hardness test application in this industry, depending on the type of manufactured part, like the Rockwell test on finished gears, Vickers case depth on threated earth hammers or Brinell hardness test on pulverizers.

Affri produces hardness testers for all applications: mining dumpers, buckets, dump bodies, heavy-duty products, agricultural equipment, all wear parts, grizzly bars, crushers, chutes, abrasion-resistant steel Hardox® (HBW 400 – HBW 450 – HBW 500 – HBW 550 – HBW 600), hydraulic breakers, rollers, sprockets, idlers, bolt & stud , track shoes, suspension group for dozer, equalizer bars, bogies and bogie pins, power train, spiders, swing gears, transmission parts, axel, bearings, gear pinion, differential parts, cutting edges, end bits, excavator tips, penetration tips, bucket rippers, bucket teeth, blades, …

BRINELL HARDNESS TESTER FOR BUCKETS, EXCAVATOR TIPS, RIPPERS AND TEETH.

Automatic Brinell hardness tester suitable for heavy duty parts like excavator buckets, tips, cutters, blades, fork teeth and all wear-abrasion-resistant steel components.

  • Fully automatic test cycle
  • Automatic turret with Brinell indenters and objectives
  • Suitable for very large as well as small parts
  • Possibility to install XY motorized stage for multi-sample tests
  • Clamping system to block the part before the hardness test
  • AFFRI® System for extreme precise measurements even under structural deflection
  • ISO17025 ILAC certification

BRINELL HARDNESS TESTER FOR PULVERIZERS AND BIG HEAT TREATED PARTS

Radial Brinell hardness tester with milling surface preparation suitable for heavy duty parts like pulverizers and large heat treated parts.

  • 45 sec for one complete test including surface preparation
  • Test 100% of production with maximum Brinell accuracy better than 0.5%
  • 2500mm height capacity, 2000mm depth capacity
  • No risk of human error, thanks to the optimal milled surface roughness
    and the automatic reading through camera
  • Always the same surface roughness, no risk of damaging or heating the
    testing surface
  • Clamping system with programmable pressing force
  • Milling depth up to 5 mm
  • Milling hardness up to 55HRC

VICKERS HARDNESS TEST FOR AUTOMATIC CHD CASE DEPTH OH THREATED PARTS LIKE EARTH HAMMER AND TOOLS

Automatic Vickers / Knoop hardness tester suitable to perform multiple measurements and find the Case Hardness Depth on treated parts earth hammers,  earthworking tools and excavator cutters.

  • Turret 7 positions
  • 2 indenters (Vickers and Knoop scales)
  • 4 objective lens (2.5x – 5x – 10x – 20x – 40x – 50x – 100x)
  • Laser
  • Panoramic overview camera
  • Fully automatic image analysis with AFFRI® Software
  • Smart software shows all results in a smart screen easy to use

BRINELL / UNIVERSAL HARDNESS TESTER FOR SMALL AND MEDIUM PARTS LIKE HAMMERS, AXES, MAULS, PICKS AND MATTOCKS

Automatic Brinell / universal hardness tester suitable to perform easy hardness measurements on construction tools like hammers, axes, mauls, picks, mattocks and any other forged tool.

  • Automatic hardness test cycle
  • Automatic turret with indenters and objectives
  • Clamping system to block the part before the hardness test
  • Strong chromed spindle to support more than 1000kg sample
  • AFFRI® System for extreme precise measurements even under structural deflection
  • ISO17025 ILAC certification

UNIVERSAL HARDNESS TESTER FOR CONSTRUCTION, MINING AND AGRICULTURAL INDUSTRY

Automatic multi-tool hardness tester suitable for Rockwell, Brinell, Vickers and Knoop hardness tests. The instrument is equipped with all indenters, objectives and tools to perform any hardness measurement by the touch of one button.

  • 9 positions 360° pneumatic turret
  • 20 sec for one complete test including dwell time
  • Suitable for very large and small parts
  • Test 100% of production with maximum accuracy better than 0.5%
  • Safe clamping on samples of any shape
  • laser pointer for testing targeting
  • AFFRI® System for extreme precise measurements even under structural deflection
  • ISO17025 ILAC certification

INTEGRAL REVOLVER

PORTABLE HARDNESS TESTER FOR HEAT TREATED TOOLS FOR EARTH MOVING AND CONSTRUCTION MACHINES

Automatic Rockwell and Brinell portable hardness tester suitable to perform easy hardness measurements on large heat treated tools directly on site or production department.

  • Rockwell and Brinell from 10 to 187.5kgf
  • Conform to ASTEM E10 – E18 – E140 – E103 and ISO 6506 – ISO 6508
  • Adaptable magnetic clamping base for round and flat samples
  • Just pull the Start lever to start the automatic test cycle
  • AFFRI® System assures the real indentation measurement without any
    external interference in any condition.
  • Operative 360° in any direction, even upside down
Menu