HOMEHome
HARDNESS TESTERSBench, Portables, Tailored
- ROCKWELLRockwell and Superficial Rockwell
- BRINELLBrinell HBW and Brinell HBWT
- VICKERSMicro Macro Vickers and Knoop
- UNIVERSALAll-in-one: Rockwell, Superficial Rockwell, Brinell, Vickers and Knoop
- PORTABLESRockwell, Superficial Rockwell, Brinell, Vickers, Knoop - ASTM E-110
- CUSTOM PROCESS HARDNESS TESTERSCustomizable hardness testers for Rockwell, Brinell, Vickers and Jominy hardness test methods. For special application like introduction in production conveyor lines and robots. Hardness test on camshafts, gas bottles, ball bearings, etc..
- HARDNESS TESTERS FOR PLASTIC AND RUBBERAutomatic testers, portables or bench top, for Shore and IRHD hardness methods. Easy measurements on plastic, rubber and synthetic fibers, in compliance with ASTM and ISO standards.
- SOFTWARE FOR AUTO-RAEDINGSoftware for automatic indent reading through camera compatible with most hardness testers.
COMPANYAbout us
NEWSExhibitions
- VIRTUAL EXPOWatch videos of our hardness testing machines and leave a comment!
- CASE STUDIESTesting solutions for customers and new hardness testing machines
DOWNLOADBrochures
CONTACTSSales Points

LD3000AX

Universal hardness testers for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. LD3000AX is a hardness testers for fully automatic test cycles including indentation autoreading through the high resolution camera and the autofocus system. Motorized measuring head and equipped with an automatic turret with indenters and magnification lenses. The instrument allows for hardness measuring in different hardness scales with just one tester, without the need of several testers in own laboratory. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Wide touchscreen for easy test planning and a clear view of results. Statistics and charts are automatically generated and can be stored with test sessions in the large archive. User friendly interface with conversion tables and round correction values for tests on covex cylindrical surfaces or various diameters. Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Knoop test on ceramic and glass materials.

Test loads: Variant from 1 to 250 kgf (From 9,807 to 2452 N). Variant from 3 to 3000 kgf (From 29.4 to 29421 N)

Rockwell ISO 6508 / ASTM E-18: HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR / HRN - HRT

Brinell HBW and HBWT ISO 6506 / ASTM E-10: HBW1/30 - HBW2.5/15.625 - HBW2.5/31.25 - HBW2.5/62.5 - HBW2.5/187.5 - HBW5/25 - HRW5/62,5 - HBW5/125 - HBW5/250 - HBW5/750 - HBW10/100 - HBW10/250 - HBW10/500 - HBW10/1000 - HBW10/1500 - HBW10/3000
HBWT2.5/62.5 - HBWT2.5/187.5 - HBWT5/125 - HBWT5/250 - HBWT5/750 - HBWT10/500 - HBWT10/1000 - HBWT10/1500 - HBWT10/3000

Vickers ISO 6507 / ASTM E-384 - Knoop ISO 4545: HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 - HV50 - HV100

One button hardness measurement

The hardness tester measuring head moves down until contact is made, applies the force and make the indentation. The software will move to the camera view mode where the indent is automatically measured.

Closed Loop (Pat. Affri)

Closed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.

Motorized measuring head

Automatic movements with automatic loading when contact is made. The approach of the head to the sample and not the opposite allows more accurate, scable and safe measurements.

Protected diamond indenter

The Affri diamond indenter has a life-span longer tanks to the special protective cup. The indenter retracts and moves down just after the test piece is clamped thereby minimizing the risk to accidental shock.

Clamping system (Pat. AFFRI)

Universal hardness tester clamping system

Secure contact with the specimen is always mantained, even in the unlikely event of any specimen movement during the operation cycle. The clamping system assures perfect stability of any test piece throughout the test cycle.

Motorized turret (Indenter/Objective)

One slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.

Software LD3000AX

The preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Powerful software for test cycle managing and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.

TECHNICAL FEATURES

	LD3000AX
Standards	EN-ISO 6506 / EN-ISO 6507 / EN-ISO 6508 / EN-ISO 2039 / EN-ISO 7619 / EN-ISO 868 / ASTM E-103 / ASTM E-18 / ASTM E-10 / ASTM E-384
Height capacity	200 - 240 mm / 7.8 - 9.4” (More on request)
Indenter and clamping hood stroke	Motorized 20 mm / 0.8”
Depth capacity	190 mm / 7.4”
Reading	Focus: automatic and manual - Reading: automatic and manual
Preload	29.4 - 98.1 N (3 - 10 kgf)
Test loads	LD3000 AX (variant 250) from 1 to 250 kgf (From 9,807 to 2452 N). LD3000 AX (variant 3000) from 3 to 3000 kgf (From 29.4 to 29421 N) Vickers - Knoop: 9.807 - 19.60 - 29.42 - 49.03 - 98.07 - 196 - 294.2 - 490.35 - 980.7 N (1 - 2 - 3 - 5 - 10 - 20 - 30 - 50 - 100 kgf) Brinell: 9.807 - 24.52 - 49.03 - 61.29 - 98.07 - 153.2 - 245.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 - 2452 - 4903 - 7355 - 9870 - 29421 N) (1 - 2.5 - 5 - 6.25 - 10 - 15.6 - 25 - 30 - 31.2 - 62.5 - 125 - 187.5 kgf - 250 - 500 - 750 - 1000 - 3000 kgf) Rockwell: 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf) Superficial Rockwell: 147.1 - 294.2 - 441.3 N (15 - 30 - 45 kgf)
Feasible tests	Rockwell: HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR Superficial Rockwell: HRN - HRT Brinell HBW (Depending on the models): HBW1/30 - HBW2.5/15.625 - HBW2.5/31.25 - HBW2.5/62.5 - HBW2.5/187.5 - HBW5/25 - HRW5/62.5 - HBW5/125 - HBW5/250 - HBW5/750 - HBW10/100 - HBW10/250 - HBW10/500 - HBW10/1000 - HBW10/1500 - HBW10/3000 Brinell HBWT (Depending on the models): HBT 2.5/62.5 - HBT 2.5/187.5 - HBT 5/125 - HBWT5/250 - HBWT5/750 - HBWT10/500 - HBWT10/1000 - HBWT10/1500 - HBWT10/3000 Vickers (Depending on the models): HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 - HV50 - HV100
Load accuracy	Better than 0.05 %

Request MORE INFO now!

Fill in the form below and we'll get back to you as soon as we can! Please fill in all required fields.

Select files to attach

Size limit for each file is 100 MB

Reset attachments

All information provided will be kept confidential. We will not disclose your personal information to a third party.

Featured Universal hardness testing machines

Universal hardness testers

Find here the AFFRI range for universal hardness testing machines suitable to test Rockwell, Superficial Rockwell, Brinell, Vickers, Knoop hardness testing methods for metals and Shore and IRHD hardness testing methods for plastic and rubber. The AFFRI Universal hardness instruments are fully conform to ASTM and ISO standards. For any further information, you're welcome to contact us.

Fully automatic Universal Hardness tester machine Integral

INTEGRAL - Fully automatic hardness testing machine with test loads from 0,1 to 3000 kgf. Motorized rotating turret up to 8 positions. Rockwell, Superficial Rockwell, Brinell HBWT, Brinell HBW, Vickers and Knoop. Touchscreen PC and high level software. Large sample capabilities.

Fully automatic Universal Hardness tester machine LD250 LD750

LD250 / LD750 - Automatic hardness testing machine with test loads from 0,1 to 3000 kgf. Rockwell, Superficial Rockwell, Brinell HBWT, Brinell HBW, Vickers and Knoop. Touchscreen PC and high level software. Large sample capabilities. Automatic turret 2 positions.

Automatic Universal Hardness tester machine LD3000AX

LA3000AX - Automatic hardness testing machine with test loads from 0,1 to 3000 kgf. Rockwell, Superficial Rockwell, Brinell HBWT, Brinell HBW, Vickers and Knoop. Touchscreen PC and high level software. Traditional stand support. Automatic turret 2 positions.

Semi automatic Universal Hardness tester machine VRS

VRS SERIE - Semi automatic hardness testing machine with test loads from 1 to 250 kgf. Rockwell, Superficial Rockwell, Brinell HBWT, Brinell HBW and Vickers. Different stand support variants.

Featured Portable hardness testing machines

Portable hardness testers

Find here the AFFRI range for portable hardness testing machines suitable to test Rockwell, Superficial Rockwell, Brinell, Vickers, Knoop hardness testing methods for metals and Shore and IRHD hardness testing methods for plastic and rubber. The portable hardness instruments are conform to ASTM and ISO standards. For any further information, you're welcome to contact us.