HOMEHome
HARDNESS TESTERSBench, Portables, Tailored
- ROCKWELLRockwell and Superficial Rockwell
- BRINELLBrinell HBW and Brinell HBWT
- VICKERSMicro Macro Vickers and Knoop
- UNIVERSALAll-in-one: Rockwell, Superficial Rockwell, Brinell, Vickers and Knoop
- PORTABLESRockwell, Superficial Rockwell, Brinell, Vickers, Knoop - ASTM E-110
- AUTOMATIC HARDNESS TESTERSCustomizable hardness testers for Rockwell, Brinell, Vickers and Jominy hardness test methods. For special application like introduction in production conveyor lines and robots. Hardness test on camshafts, gas bottles, ball bearings, etc..
- HARDNESS TESTERS FOR PLASTIC AND RUBBERAutomatic testers, portables or bench top, for Shore and IRHD hardness methods. Easy measurements on plastic, rubber and synthetic fibers, in compliance with ASTM and ISO standards.
- SOFTWARE FOR AUTO-RAEDINGSoftware for automatic indent reading through camera compatible with most hardness testers.
COMPANYAbout us
NEWSExhibitions
- VIRTUAL EXPOWatch videos of our hardness testing machines and leave a comment!
- CASE STUDIESTesting solutions for customers and new hardness testing machines
DOWNLOADBrochures
CONTACTSSales Points

DM 8 / DM 2

Automatic dead weight hardness tester for micro and macro Vickers and Knoop method, single or multiple indentations. DM8 and DM2 are low cost microhardness testers with high accuracy standards. They are equipped with a motorized rotating turret with combined magnification lenses and indenters for reading and indenting. For micro and macro Vickers and case depth test on all metals: Iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing. Knoop test on ceramic and glass materials.

DM8

DM2

Test Loads: from 1 gf to 2 kgf (from 0,0098 to 19,614 N)

Vickers ISO 4545 / ASTM E-384: HV0,001 - HV0,003 - HV0,005 - HV0,01 - HV0,025 - HV0,05 - HV0,1 - HV0,2 - HV0,5 - HV1 - HV2

Knoop ISO 6507 / ASTM E-384: HK0,01 - HK0,025 - HK0,05 - HK0,1 - HK0,2 - HK0,5 - HK1

TECHNICAL FEATURES

	DM2 Auto/Semi/Manual	DM8 A Auto/Semi/Manual	DM8 B Auto/Semi/Manual
Standards	DIN-EN-ISO 6507 / ISO 4545 / ASTM E-384 / JIS B 7734
X/Y Table	Manual / Semi: Manual table 100 x 100 mm with 10 μm step Auto: Motorized table 100 x 60 mm or 200 x 100 mm (automatic) with 0.5 μm step
Elevating screw stroke	0/110 mm	0/120 mm
Depth capacity	0/70 mm	0/160 mm
Turret (Indenter/Objectives)	Motorized - 4 slots	Motorized - 6 slots
Indent reading	Auto: Automatic focus with auto reading Semi: Manual focus with auto reading Manual: Manual focus and manual reading
Test loads	0.09807 - 0.2452 - 0.4903 - 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 N (10 - 25 - 50 gf / 0.1 - 0.2 - 0.3 - 0.5 - 1 kgf)	0.04903 - 0.09807 - 0.2452 - 0.4903 - 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 N (5 - 10 - 25 - 50 gf / 0.1 - 0.2 - 0.3 - 0.5 - 1 kgf)	0.0098 - 0.0294 - 0.04903 - 0.09807 - 0.2452 - 0.4903 - 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.614 N (1 - 3 - 5 - 10 - 25 - 50 gf / 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 kgf)
Feasible tests	Vickers (Knoop on request)
Accuracy	Better than 1 %

REQUEST A FREE QUOTE TODAY!

Fill in the form below and we'll get back to you as soon as we can! Please fill in all required fields.

Name..

Company..

Nation

City

Address

Email..

Phone..

Message..

Insert code

All information provided will be kept confidential. We will not disclose your personal information to a third party.

Featured Vickers hardness testing machines

Vickers hardness testers and Vickers hardness testing machines

Find here the AFFRI range for Vickers hardness testers and hardness testing machines. The AFFRI Vickers and micro Vickers hardness instrument are fully conform to ASMT and ISO standards.
If you are looking for what is a Vickers hardness test and how you can test the hardness of your product, you can read the explenation below. For any further information, you're welcome to contact us.

Automatic Vickers Hardness tester machine WIKI JS

Fully automatic hardness testing machine with test loads from 0,001 to 100 kgf. Vickers, Micro Vickers and Knoop. Fully motorized for CHD tests on multiple samples. Full-HD 24" monitor, PC and high level software.

Micro Vickers and Knoop simple hardness testing machine with test force from 0.01 to 62,5 kgf (load cell and Closed Loop). Automatic reading with camera.

Non destructive Vickers Hardness tester machine LD3000AF

Special hardness testing machine for non destructive Vickers CHD tests on heat treated products. Touchscreen PC and high level software.

Simple Vickers Hardness tester machine DM

Semi-automatic simple hardness testing machine with test loads from 0,001 to 2 kgf. Vickers, Micro Vickers and Knoop. Different models with automation levels

Software for automatic indentation reading through camera. Vickers, Knoop and Brinell. Suitable to be installed on all manual hardness testers and retrofits.

Featured Portable hardness testing machines

Portable hardness testers and portable hardness testing machines

Find here the AFFRI range for portable hardness testers and hardness testing machines suitable to test Rockwell, Superficial Rockwell, Brinell, Vickers, Knoop hardness testing methods for metals and Shore and IRHD hardness testing methods for plastic and rubber. The portable hardness testing machines are conform to ASTM and ISO standards. For any further information, you're welcome to contact us.