WIKI 90 JS
  • Dealers
NEW!WIKI 90 JS - Simple Micro Vickers hardness testing machine
 Micro Vickers hardness tester Wiki90
 
 

  VICKERS     KNOOP     BRINELL HBW  

Test loads: from 1 gf to 62.5 kgf (0.0098 to 612.9 N)

Vickers ISO 6507 / ASTM E-384 E-92: HV0.001 - HV0.005 - HV0.01 - HV0.015 - HV0.02 - HV0.025 - HV0.05 - HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30 - HV50

Knoop ISO 4545 / ASTM E-384 E-92: HK0.01 - HK0.02 - HK0.025 - HK0.05 - HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1

Brinell ISO 6506 / ASTM E-10: HBW 1/1 - HBW 1/1.25 - HBW 1/2.5 - HBW 2.5/62.5 - HBW 1/5 - HBW 1/10 - HBW 1/30 - HBW 2.5/6.25 - HBW 2.5/7.8125 - HBW 2.5/15.625 - HBW 2.5/31.25 - HBW 2.5/62.5

 
 

MAIN FEATURES

MOTORIZED TURRET
 

Vickers hardness tester turret
 
Horizontally rotating turret with four slots for magnification lenses and two for indenters. All optical microscope objectives can be pre-installed and combined with indenters for every Vickers and Knoop hardness scales.

Automatic Reading
 

Vickers auto reading
 
Automatic indentation reading through camera. To make the test just place the specimen under position, push the start button: the hardness tester will make the contact, apply the test force, switch to the objective, measure the indent and give the result.

Closed Loop (Pat. AFFRI)
 

Hardness tester Closed Loop
 
Load forces are applied through load cells and controlled in "Closed Loop" with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by misalignment or problems associated with dead weight systems on traditional testers
 

XY STAGE
 

Vickers hardness tester xy stage
 
Manual XY table 100x100mm with 10 μm step. This table is a perfect solution for manual CHD case depth tests and can be provided with digital micrometers for automatic CHD graph generation.

Precise fucusing
 

Vickers auto reading
 
The ergonomic and handly wheel on the tester side controls the Z stroke. It allows precise focus adjustmens as well as fast movements.

Lifting system
 

Hardness tester Closed Loop
 
The vertically sliding chromed spindle is a perfectly steble support for the specimen. It is possible to install different types of pieceholder anvils.
 
 
 
 

WIKI JS SOFTWARE

Vickers Knoop hardness tester software

- High definition monitor 24”
- Clear view of the indentation and the testing zone
- Direct conversion in HR, HB, HK and other scales
- Visual control of all results and live statistics
- Print results from template or save / import test cycles from archive
- Customizable test report with customer logo, specimen information, statistics and graphs
- Control the whole instrument with the mouse

The AFFRI Vickers measuring software has been studied to fulfill any client need and to be accessible to every operator. This is a “SMART SOFTWARE” which results extremely easy to be used and can be customized to display only needed testing procedures.
 

Automatic reading
 

Vickers hardness tester turret
 
Vickers, Knoop and Brinell measurements with the same hardness testing machine. From perfectly polished to rough & etched samples, the software will automatically measure indents on any sample surface.

Automatic Illumination
 

Vickers auto reading
 
Automatic light regulation on dark, opaque or polished samples. The hardness tester controls and adjusts the light and contrast to find the right combination and measure the indent. Just place the specimen and click the illumination button to see the change.

Test report
 

Hardness tester Closed Loop
 
Customizable test report with client logo and information. Put as many sample information as you need, including pictures of the indents and test area. Examine results, statistics and CHD diagram. Results can be exported also as CSV file.
 

SOFTWARE ADD-ON

XY SEMI
 

Vickers hardness tester turret
 
This software pack is provided with digital micrometers and it is used for assisted CHD case depth tests with automatic CHD graph generation.

AUTO WELD
 

Vickers auto reading
 
Easy testing on welded samples thanks to the predefined patterns templates and the drag positioning feature for groups of indents.

AUTO GRAIN
 

Hardness tester Closed Loop
 
Grain Size Analysis (ASTM E112 and EN ISO 643), automatic Spheroidal Graphite Nodule Analysis (ISO 945) and utomatic Phase Percentage Analysis.
 

 

TECHNICAL FEATURES

 
WIKI 90 JS
Standards
DIN-EN-ISO 6506 / DIN-EN-ISO 6507 / DIN-EN-ISO 4545 / ASTM E-92 / ASTM E-384 / JIS B 7734
X/Y table
Manual - 100x100 mm with 10 μm step
Vertical head stroke
0/135 mm
Depth capacity
163 mm
Indent reading

Manual focus with automatic and manual reading

Force range

0.09807 - 0.1471- 0.1961 - 0.2452 - 0.4903 - 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.61 - 29.42 - 49.03 - 98.07 N
(0.01 - 0.015 - 0.02 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 - 3 - 5 - 10 kgf)
 
As optional:
From 0.0098 to 0.09807 N (1 gf to 10 gf)
From 98.1 to 612.9 N (10 to 62.5 kgf)

Feasible tests
Vickers
On request Knoop and Brinell
Load accuracy
Better than 0.05 %

REQUEST A FREE QUOTE TODAY!

Fill in the form below and we'll get back to you as soon as we can! Please fill in all required fields.
captcha
Reload
All information provided will be kept confidential. We will not disclose your personal information to a third party.

Featured Vickers hardness testing machines

Featured Portable hardness testing machines

Rockwell1Brinell1Vickers1Universal1Portables1Customized1Plastic1

youtubegooglelikendin