TESTING MACHINES

COMPRESSION – TENSION – TORSION

COMPRESSION – TENSION – TORSION

MATERIAL TESTING MACHINES
THE RANGE

Material testing machines with absolute measurement on the extension. Definition of 0.001 mm and different strain gauge modes: automatic, and optical systems. Extraordinary reactive measurements and a high-level sensitivity of 1ms (millisecond) and 100,000 divisions.

DYNO

MEDIUM-LOAD UNIVERSAL MATERIAL TESTING MACHINE

UTM Machine DYNO

Dyno is a new generation of medium load universal material testing machine with double ball bearing guides and friction-free sliding and very high sensitivity and precision play; is entirely managed by the computer in a Windows 10 environment with an original Affri closed-loop system with bidirectional load cells.

Compression
Traction
Bending
Elasticity

Traction, compression, bending, cyclic, elasticity, creep, on springs, metals, plastics, fabrics and any other material. Single or repetitive measurements that can be stored in several cycles and combined with product and customer codes. Scanning with Q reader for product self-recognition. Connection to an ethernet network for continuous assistance and calibration, data transmission. Possible multi-cells pre-inserted and always ready for use.

DYNO FEATURES

  • A unique feature: The Dyno Model is being able to install 3 load cells. They have different capacities, but they are always installed, calibrated, and ready for use. Thus eliminating the need for assembly.
  • It has reactive measurements with a sensitivity of 1ms (millisecond) and a 100,000 divisions
  • A great user experience: our years of hard work have created and developed a management software tailored to the user. This managing software is simple and intuitive and doesn’t require manual or training courses.
  • The Dyno Model also has a fully guided test procedure combined. Thus, a big part of the process is dedicated to the collection and data processing to gain diagrams and reports complete. These data sheets have, also, information and data that can be filtered and managed directly by the user simplifying, so, all the readings.
  • This model was designed to simplify user engagement during the test cycle. This model is has been thought of for all consumer’s needs too. It works, in specific, for measurements on springs or any material tests cycles. All this produced data can be stored in the high-level capacity database to create repetitive cycles.
  • Wide choice of accessories, that can be customized, for each type of test. Consult our factsheet and accessories table available.
  • Controls are on a high-definition touch panel: very intuitive, easy to use, and equipped with keys.
  • Safety precautions with controlled closing and transparent anti-break-in: all according to the CE standards.
  • Model Dyno has multilingual software connectable to an Ethernet network that can link you with all our experts at any moment. We are at your complete disposal for remote assistance and for data transfer.
  • This machine has an absolute measurement on the extension with a definition of 0.001 mm. It also has different strain gauge methods: at contact and optics ones.

Clamping vice and extensometer for every need:

TECHNICAL FEATURES

MODEL2C102C152C202C302C40
CAPACITY MAX KN11,5234
MINIMUM DIVISION N0,040,060,080,120,16
USEFUL HEIGHT mm300 (FOR ALL MODELS)
MINIMUM DIVISION mm0.01 (FOR ALL MODELS)
INTER-AXIS COLUMNS215 (FOR ALL MODELS)
PLATES DIAMETER100 (FOR ALL MODELS)
POWER SUPPLY220V 50:60 Hz 200 VA (FOR ALL MODELS)

TORSIOMETER TM

MICRO, MEDIUM AND HIGH LOAD TORSION TESTING MACHINE

UTM torquemeter TM

TORSIOMETER TM FEATURES

  • The torsiometer model TM has an ultra-accurate torque measurement with a sensitivity of 1ms (millisecond) and 100,000 divisions, 0.1°.
  • It has single, rapid multi-position measurements and the auto-zero recognition.
  • A great user experience: our years of hard work have created and developed a management software tailored to the user. This managing software is simple and intuitive and doesn’t require manual or training courses.
  • The TM Model also has a fully guided test procedure combined. Thus, a big part of the process is dedicated to the collection and data processing to gain diagrams and reports complete. These data sheets have, also, information and data that can be filtered and managed directly by the user simplifying, so, all the readings.
  • This model was designed to simplify user engagement during the test cycle. This model is has been thought of for all consumer’s needs too. It works, in specific, for measurements on springs or any material tests cycles. All this produced data can be stored in the high-level capacity database to create repetitive cycles.
  • Wide choice of accessories, that can be customized, for each type of test. Consult our factsheet and accessories table available.

TECHNICAL FEATURES

MODELTM02TM0,4TM1TM2TM4TM10TM20TM500
USEFUL CAPACITY Nmm20040010002000400001000020000500000
MINIMUM DIVISION Nmm0,0080,0150,040,080,150,40,80,8
SPRING DIAMETER mm200 (FOR ALL MODELS)
OPENING BETWEEN THE PLATES150 (FOR ALL MODELS)
PERFORMABLE ROTATIONS27 (FOR ALL MODELS)
MIN CORNER DIVISION0,1° (FOR ALL MODELS)
POWER SUPPLY220V 50:60 Hz 200 VA (FOR ALL MODELS)

TORSIOMETER TR

MICRO AND MEDIUM LOAD TORSION TESTING MACHINE

UTM Machine torque TR

Torsiometer TR is a new generation of medium and micro load torsion testing machines with manual control with double recirculating ball guides, friction-free movement, and very high sensitivity action; the data is entirely managed through a microcomputer in a Windows10 environment, with an original Affri loop system, with bidirectional load cells, very high definition, color screen, and very intuitive touch panel controls. Ethernet connection for data transfer and remote continue assistance.

Torsion

Positive and negative twist at multiple positions. Self-recognition of zero position. Scanning with Q reader for product self-recognition. Ethernet network connection for continuous assistance and calibration, data transmission. Possible multi-cells pre-inserted and always ready for use.

TORSIOMETER TR FEATURES

  • Ultra-precise torque measurement with sensitivity of 1/millisecond and 100,000 divisions and 0.1°
  • Single, rapid multi-position measurements, auto zero recognition
  • Our many years of experience has created a management software tailored to the user; simpleand intuitive that does not require a manual or training courses.
  • fully guided test procedures combined with a rich part dedicated to the collection an data processing to obtain diagrams and reports complete with information and data that they can be filtered and managed by the user.
  • designed for the needs of users and specific for measurements on springs or any material, tests cycles, which can be stored in the rich database to create repetitive cycles.
  • Choice and custom accessories for each type of test. Consult our factsheet and table accessories available on data sheet and available accessories table.

TECHNICAL FEATURES

MODELTR02TR0,4TR1TR2TR4TR10TR20
USEFUL CAPACITY Nmm20040010002000400001000020000
MINIMUM DIVISION Nmm0,0080,0150,040,080,150,40,8
SPRING DIAMETER mm200 (FOR ALL MODELS)
OPENING BETWEEN THE PLATES150 (FOR ALL MODELS)
PERFORMABLE ROTATIONS27 (FOR ALL MODELS)
MIN CORNER DIVISION0,1° (FOR ALL MODELS)
POWER SUPPLY220V 50:60 Hz 200 VA (FOR ALL MODELS)

SPRING TESTER 2C

MICRO AND MEDIUM LOAD SPRING TESTING MACHINE

Spring tester 2C

Spring Tester 2C is a new generation of manual instrument for testing springs at medium load with double recirculating ball guides and sliding without friction and play with very high sensitivity and precision; with bidirectional load cells.

Compression
Traction
Elasticity

Positive and negative twist at multiple positions and multiple loops. Self-recognition of zero. Scanning with Q reader for product self-recognition. Ethernet network connection for continuous assistance and calibration, data transmission. Possible multi-cells pre-inserted and always ready for use.

SPRING TESTER 2C FEATURES

  • A unique feature: The 2C Model is being able to install 3 load cells. They have different capacities, but they are always installed, calibrated, and ready for use. Thus eliminating the need for assembly.
  • Controls are on a high-definition touch panel: very intuitive, easy to use, and equipped with keys.
  • Model 2C has multilingual software connectable to an Ethernet network that can link you with all our experts at any moment. We are at your complete disposal for remote assistance and for data transfer.
  • It has an absolute measurement on the extension with the definition of 0.001 mm
  • Reactive measurement with a sensitivity of 1ms (millisecond) and 100,000 divisions, 0.1°
  • Optional data management software to create displacement/load reports and diagrams
  • Choice and customized accessories for each type of test. Consult our datasheet and the table of available accessories

TECHNICAL FEATURES

MODEL2C102C152C202C302C40
CAPACITY MAX KN11,5234
MINIMUM DIVISION N0,040,060,080,120,16
USEFUL HEIGHT mm300 (FOR ALL MODELS)
MINIMUM DIVISION mm0.01 (FOR ALL MODELS)
INTER-AXIS COLUMNS215 (FOR ALL MODELS)
PLATES DIAMETER100 (FOR ALL MODELS)
POWER SUPPLY220V 50:60 Hz 200 VA (FOR ALL MODELS)

SPRING TESTER PC

MEDIUM LOAD SPRING TESTING MACHINE

Spring Tester PC a new generation of manual spring testing instruments at medium load with double recirculating ball guides and sliding without friction and play with very high sensitivity and precision; with bidirectional load cells.

Compression
Traction
Elasticity

Positive and negative twist at multiple positions and multiple loops. Self-recognition of zero. Scanning with Q reader for product self-recognition. Ethernet network connection for continuous assistance and calibration, data transmission. Possible multi-cells pre-inserted and always ready for use.

SPRING TESTER PC FEATURES

  • Unique feature of being able to install 3 load cells with different capacities always ready for use, always calibrated, eliminating the need for assembly
  • Controls on high definition touch panel very intuitive and with keys
  • Multilingual software connectable to an Ethernet network for remote assistance and data transfer.
  • Absolute measurement on the extension with the definition of 0.001 mm
  • Reactive measurements with a sensitivity of 1 / millisecond and 100,000 divisions
  • Optional data management software to create displacement/load reports and diagrams
  • Choice and customized accessories for each type of test. Consult our datasheet and the table of available accessories

TECHNICAL FEATURES

MODELPC3PC5PC10PC20PC50
CAPACITY KN3050100200500
MINIMUM DIVISION N0,00120,0020,0040,0080,02
USEFUL HEIGHT mm197 (FOR ALL MODELS)
MINIMUM DIVISION mm0.01 (FOR ALL MODELS)
PLATES DIAMETER50 (FOR ALL MODELS)
POWER SUPPLY220V 50:60 Hz 200 VA (FOR ALL MODELS)
Menu