AFFRI VIRTUAL EXPO

Automatic and motorized hardness tester in compliance with ASTM and ISO hardness standards. MRS Series are top level bench hardness testers for tough or lab applications. Fully motorized for fully automatic test cycles. Absolute load accuracy (better than 0.1 %) in every condition. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Exact hardness result on the first test and R&R data at the top of his class.

Semi-automatic hardness testers in compliance with ASTM and ISO standards. Simple hardness tester with high accuracy standards. To perform the test just act on the elevating screw and bring the sample to make contact with the indenter, pull the lever and within seconds results appear. Load forces are applied through a load cell system. The naked indener allows testing on very small specimens and profiles.

Universal hardness tester for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. LD 250 is a top level bench hardness tester for fully automatic test cycles including indentation autoreading through the high resolution camera. The LD250 allows hardness testing in different hardness scales with just one testers, without the need of several testers in own laboratory.

Special automatic hardness tester suitable for testing on gear teeth, gear rings and gear shafts. Fully automatic and motorized hardness tester – Automatic test cycle with one button drive – The load precision is controlled via closed loop load cells at 1000Hz (Affri patented) – L.I.S.A. laser pointing system allows perfect positioning at any point – Sliding conveyor table with multiple support bases – Automatic alignment between the indenter and the gear tooth.

Double magnetic clamping base for Brinell tests at 187.5 kgf with direct reading. Easy and traceable hardness testing on large metal plates, flat rolled steel products and lagre parts. It is completely uninfluenced by direction so that it is operative up to 360° degrees of positioning, even upside down. Load forces are applied through a dynamometric load cell. This hardness tester ensures the highest accuracy and repeatability at every measurement.

Hardness tests in laboratory or in loco on tubes, profiles, valves and every bulky or small pieces starting from a thickness of 0.06 mm: small penetration assures excellent results on thin surfaces such as cromium coating or on parts as thin as shave blade profiles. In compliance with DIN 50157. MKII is a small and light portable hardness tester where load forces are applied through a dynamometric load cell. Operative up to 360° degrees of positioning, even upside down. It is equipped with a LCD operating console with a user friendly interface and extremely easy test settings.