wiki 90 js, vickers hardness tester by Affri

MICRO HARDNESS TESTER

Hardness tester for micro macro Vickers and Knoop.

WIKI 90 JS

Micro hardness tester: Simple, Semi or Auto

Microhardness testing machine Wiki 90 JS is a Vickers and Knoop hardness tester with test loads from 0,001 to 62,5 kgf. This hardness tester is suitable to test Micro Vickers, Macro Vickers, Knoop, and Brinell hardness test scales. Wiki 90 JS is conformed to all hardness standards including ASTM and ISO.

Test loads

from 1 gf to 62.5 kgf (0.0098 to 612.9 N)

Vickers ISO 6507 / ASTM E-384 / ASTM E-92

HV0.001 – HV0.005 – HV0.01 – HV0.015 – HV0.02 – HV0.025 – HV0.05 – HV0.1 – HV0.2 – HV0.3 – HV0.5 – HV1 – HV2 – HV3 – HV5 – HV10 – HV20 – HV30 – HV50

Knoop ISO 4545 / ASTM E-384 / ASTM E-92

HK0.01 – HK0.02 – HK0.025 – HK0.05 – HK0.1 – HK0.2 – HK0.3 – HK0.5 – HK1

Brinell ISO 6506 / ASTM E-10

HBW 1/1 – HBW 1/1.25 – HBW 1/2.5 – HBW 1/5 – HBW 1/10 – HBW 1/30 – HBW 2.5/6.25 – HBW 2.5/7.8125 – HBW 2.5/15.625 – HBW 2.5/31.25 – HBW 2.5/62.5

Vickers Knoop hardness tester XY

Motorized and automatic, the test is not affected by operator influences and can easily be used by operators of every level

DESIGNED FOR EASY TESTING

ONE TOUCH MEASUREMENTS

Micro hardness tester WIKI 90 JS is a motorized and automatic system for Vickers, Knoop, or Brinell hardness testing with load cell technology, a high definition camera for indent auto-reading, and a motorized turret with 6 positions. Fully conforms to ASTM and ISO hardness standards.

The microhardness measurement:

The test operation is very simple, just load the sample and click the START icon: the hardness tester indents the sample, moves to the camera, measures, and generates data dynamically. Semi-automatic case hardness depth (CHD) can be easily done thanks to the 1µm step XY table connected to the PC and the step-by-step assisted procedure.

For micro-macro Vickers and CHD case depth tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper, and metal alloys. Heat treatment, hardening, nitriding, cementation, and hard facing. Knoop test on ceramic and glass materials.

Speed, accuracy, and infinite functions in a semi-automatic solution.

Vickers test CHD

EASY STEP-BY-STEP CHD

Vickers Knoop hardness test report
  • CHD TRAVERSES AND PATTERNS
    Single or multiple traverses/patterns can be rapidly created. With one simple click of the line, the angle and the starting point of the indentations are determined.
  • SEMI-AUTOMATIC CHD TESTS
    Digital micrometers connected to the PC. Movements resolution of 1 µm step. Step-by-step assisted procedure to easily test at the perfectly right XY quote.
  • CREATE, SAVE AND RELOAD
    No need to create the same pattern over and over again. This feature is extremely useful for users who analyze the same kind of areas repeatedly. Once a pattern has been created, you can save it and re-load it later to duplicate the analysis on a new sample.
  • EDIT, MOVE, OR DELETE
    Select the pattern from the preview image and modify direction, position, hardness scale, number and distances of indent, pattern name, and point of focus.
  • IN AND OUT ZOOMING
    Zoom out to look at the entire sample in order to identify the pattern position and direction. Zoom-in to verify pattern distances and spot surface imperfections.

LOOKING FOR A SMART SOFTWARE?

It can’t be easier! The Vickers software is suitable to fulfill any measuring need and to be accessible to every operator.
This is a “SMART SOFTWARE”, extremely user friendly but complete of all the functions needed for simple or multi- cycles Vickers hardness tests:

  • Single and simple Vickers test
  • The automatic conversion in all scales (Rockwell, Brinell, Knoop, ASTM, and ISO)
  • Multi-test and multi-sample hardness test with automatic cycle
  • Automatic Vickers case hardness depth (CHD, NHT, EHT, RHT, ..)
  • The dimensional measure of layers
  • Crack measurements
  • Automatic Vickers test on Welding
  • Direct result export via Ethernet
  • Customizable test report with the client logo, specimen information, indent images, statistics, and graphs.

Ready for INDUSTRY 4.0!

Vickers hardness test software touchscreen

FREE YOUR TIME FOR OTHER TASKS

Knoop hardness test software

Micro hardness tester Wiki 90 JS has software designed for intuitive and simple use. All you have to do, for case hardness depth, with three easy steps:

Obtain a perfect, detailed, high-resolution panoramic view of the sample using the panoramic feature. The picture is clear, sharp, and without any distortion.

Create, save, open, modify, copy or paste Vickers multi-tests to predefined locations with a simple click. Create case depth traverses or fill a surface with indentation points to control sample uniformity.

The hardness tester brings you to the right position, indents the sample, measures, and generates data dynamically. Review results in graphical and/or tabular format. Export results to any spreadsheet application, or simply print standard or customized reports.

The Vickers hardness tester teaches the operator how to move, saving time and money, thus increasing the accuracy of results.

AUTO-COMPENSATION OF ALL DEFLECTIONS

When testing unstable samples or deflecting parts, the AFFRI System will follow the sample without losing contact thanks to its infinite stroke for indenter and clamping hood.

Load forces are applied through load cells and controlled in “Closed Loop” with a frequency of 1 kHz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment, or vibration.
Accurate measurements on the first test, even in extreme conditions, eliminate the need for repeated tests. The R&R data is at the top of its class.

Vickers Hardness tester valve

MICRO HARDNESS TESTER WIKI90 JS

MAIN FEATURES

MOTORIZED TURRET

Horizontally rotating turret with four slots for magnification lenses and two for indenters. All-optical microscope objectives can be pre-installed and combined with indenters for every Vickers and Knoop hardness scale.

hardness tester XY manual table

DIGITAL XY STAGE

Dimension 135x135mm, travel 50x50mm, 0.001mm digital step. With micrometers connected to the PC and the software for multi-indentation patterns, this table is a perfect solution for semi-automatic CHD case hardness depth tests.

hardness tester focus hand wheel

PRECISE FOCUSING

The ergonomic and handy wheel on the side of the tester controls the Z-axis for the entire vertical stroke. It allows precise focus adjustments on small indentations as well as fast long movements for sample accommodation.

AUTOMATIC READING

Automatic indentation reading through the camera. Vickers, Knoop, and Brinell measurements with the same hardness testing machine. From perfectly polished to rough & etched samples, the software will automatically measure indents on any sample surface.

LIGHT CONTROL

Automatic light regulation on dark, opaque or polished samples. The hardness tester controls and adjusts the light and contrast to find the right combination and measure the indent. Just place the specimen and click the illumination button to see the change.

TEST REPORT

Customizable test report with company logo and information. Put as much sample information as you need, including pictures of the indents and test area. Examine results, statistics, and CHD diagram. Results can be exported also as a CSV file.

Vickers hardness CHD

CHD TRAVERSES

Case Hardness Depth

Vickers hardness CHD gear

FREE PATTERNS

Create the shape you want

Vickers hardness surface

SURFACE PATTERN

Study sample uniformity

Vickers hardness superficial

RADIUS PATTERN

Study uniformity per radius

Vickers hardness test weld

WELD TEST

Automatic cycles

Vickers hardness crack test

FRACTURE TOUGHNESS

Vickers indentation crack length

Vickers hardness layer

DIMENSIONAL MEASUREMENTS

Layer thickness or detail length

BAR-CODE SCANNER

Import sample info or measure pre-set

THE ACCESSORIES

Vickers Hardness tester indenter

INDENTERS

Vickers and Knoop ASTMISO

TEST BLOCKS

Vickers and Knoop ASTMISO

SAMPLE SUPPORTS

Single or multi-sample

Vickers hardness tester objectives

OBJECTIVES

2,5X / 5X / 10X / 20X / 40X / 50X / 100X

XY STAGE

135×135 and 100x100mm, digital or manual

Vickers hardness tester table

DEDICATED TABLE

Side table suitable right or left

THE ACCESSORIES

Vickers Hardness tester indenter

INDENTERS

Vickers and Knoop ASTMISO

TEST BLOCKS

Vickers and Knoop ASTMISO

SAMPLE SUPPORTS

Single or multi-sample

Vickers hardness tester objectives

OBJECTIVES

2,5X / 5X / 10X / 20X / 40X / 50X / 100X

XY STAGE

135×135 and 100x100mm, digital or manual

Vickers hardness tester table

DEDICATED TABLE

Side table suitable right or left

WIKI 90 JS MODELS

WIKI 90 JS A

Simple spindle
Turret 3 position
Minimum load 100gf

WIKI 90 JS B

Precise spindle
Turret 6 positions
Minimum load 10gf (1gf optional)

WIKI 90 JS C

As WIKI 90 JS B plus digital XY stage connected to the PC

Vickers hardness tester WIKI 200 JS - Affri Hardness Testers

WIKI 200 SJ

Fully automatic system

TECHNICAL SPECIFICATIONS

StandardsDIN-EN-ISO 6506 / DIN-EN-ISO 6507 / DIN-EN-ISO 4545 / ASTM E-92 / ASTM E-384 / JIS B 7734
Height CapacityMotorized 145 mm / 5.7”
Depth Capacity163 mm / 6.4”
Indent ReadingManual focus with automatic reading
Force rangeVickers/Knoop: 0.0098 - 0.0196 - 0.049 - 0.098 - 0.1471 - 0.1961 - 0.2452 - 0.4903 - 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.61 - 29.42 - 49.03 - 98.07 - 196.1 - 294.2 - 490.3 N
(0.001 - 0.002 - 0.005 - 0.01 - 0.015 - 0.02 - 0.025 - 0.05 - 0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 - 3 - 5 - 10 - 20 - 30 - 50 kgf)
Brinell: 9.807 - 12.26 - 24.52 - 49.03 - 61.29 - 76.61 - 98.07 - 153.2 - 294.2 - 306.5 - 612.9 N
(1 - 1.25 - 2.5 - 5 - 6.25 - 7.8125 - 10 - 15.625 - 30 - 31.25 - 62.5 kgf)
Feasible testsVickers: HV0.01 - HV0.015 - HV0.02 - HV0.025 - HV0.05 - HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10
Knoop: HK0.01 - HK0.015 - HK0.02 - HK0.025 - HK0.05 - HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1 - HK2

or

Vickers: HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30
Knoop: HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1 - HK2

optional:
Vickers / Knoop: HV0.001 - HV0.002 - HV0.005 - HV50 - HV100 / HK0.001 - HK0.002 - HK0.005
Brinell HBW: 1/1 – 1/1.25 – 1/2.5 – 1/5 – 1/10 – 1/30 – 2.5/6.25 – 2.5/7.8125 – 2.5/15.625 – 2.5/31.25 - 2.5/62.5
Load accuracyBetter than 0.1%

FEATURED VICKERS HARDNESS TESTERS

Vickers automatic hardness test

WIKI 200 JS

Vickers
Fully automatic hardness testing machine with test loads from 0,001 to 100 kgf. Vickers, Micro Vickers and Knoop. Fully motorized for CHD tests on multiple…
See more
Vickers Knoop hardness test software

RETROFIT KIT

Vickers
The measuring software, supplied with a camera and a mounting kit (adaptor) upgrades the old hardness tester with the automatic reading of Vickers, Knoop, and…
See more

LD3000AF

Vickers
Special hardness testing machine for non destructive Vickers CHD tests on heat treated products. Touchscreen PC and high level software.
See more
Menu