Portable hardness tester shore model, affri hardness testers

SHORE PORTABLE HARDNESS TESTER

Portable Hardness Tester for plastic and rubber

SHORE

Portable Hardness tester Shore, for rubbers and plastics

Shore A – B – C – D – D0 – 0 – 00 – E – M – 000 – 000S

Portable hardness tester Shore is in compliance with ASTM 2240, ASTM 1414, ISO 7619 and ISO 868 standards. The AFFRI Shore hardness tester has a slim measuring nose to ensure exact measurement also on small components. It is suitable for Shore hardness test on tires, rolls, soft flexible rubber, plastic, PVC, polyester, neoprene, leather, Thiokol, nitrile rubbers, etc.

BENCH-TOP stand support:

Bench stand support for extremely precise hardness testing. The force is applied perpendicularly to the sample surface with high stability at any dwell time.
The constant pressure from the top assures a very accurate measurement. Very easy mounting of the probe on the stand support, just screw-unscrew. Supplementary weight for Shore C-D-DO are available.

HIGH QUALITY FOR LASTING RELIABILITY

  • 100% made in Italy
  • Tungsten carbide indenter to guarantee maximum efficiency over the time
  • Robust and resistant in every test condition
  • R&R high performance
  • Designed, assembled and calibrated by ten years experience hands
  • Second pointer available for automatic save of the measurement result
  • Set of six plastic or rubber test blocks available, from soft to hard, with accredited certificate.

HOW DOES IT WORK?

It is extremely easy to use: just push the probe on the surface of the sample, wait some seconds (dwell time) and read the hardness value!

SHORE HARDNESS TESTER

MAIN FEATURES

CLAMPING SYSTEM

hardness tester clamping system to apply constant, vertical, and centered pressure on any sample, even on curved surfaces, assuring accurate results on any surface. (Optional accessory Mod. 3003)

BENCH SUPPORT

Shore hardness tester can be equipped with a bench stand support for extremely precise hardness testing.
Height capacity 50 mm – Depth capacity 50 mm. (Art. 13)

O-RINGS ASTM 1414

Set of clamping holders is for O-Rings in compliance with ASTM 1414. Bench-top support required. Sections Ø 1 – 1.79 – 2.62 – 3.53 – 5.33 – 6.99 mm. Other on request.

SHORE HARDNESS TESTERS AVAILABLE

SHORE
(ISO 7619 / ASTM E2240)
   
Shore AASTM E2240
ISO 7619
Frustum 35°Soft surfaces, flexible rubber, natural rubber, plastic, PVC, polyester, neoprene, leather, nitrile rubbers, tires, etc
Shore DASTM E2240
ISO 7619
Cone 30°Hard and rigid surfaces, ceramic and composites, acrylics, plexiglass, print rolls, cellulose, acetates, nylon, etc
Shore BASTM E2240Cone 30°Medium values. As A scale for higher values.
Shore CASTM E2240Frustum 35°Medium-hard values. As D scale for lower values.
Shore DOASTM E2240Ball 1.2 mmFrom medium-hard to hard values. As B and C.
Shore OASTM E2240Ball 1.2 mmLow values and very flexible materials. As A scale for low values.
Shore OOASTM E2240Ball 1.2 mmVery soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon
Shore EASTM E2240Ball 2.5 mmVery soft rubbers, natural rubber, elastomers, casting resin, soft PVC, leather, etc.
Shore MASTM E2240Cone 30°As A scale, for thin specimens and elastomer materials.
Shore 000ASTM E2240Ball 6.35 mmUltra-soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon.
Shore 000-SASTM E2240Ball 10.7 mmUltra-soft rubbers, viscoelastic polymers.

SHORE
(ISO 7619 / ASTM E2240)

  • Shore A – ASTM E2240 – ISO 7619 – Frustum 35° – Soft surfaces, flexible rubber, natural rubber, plastic, PVC, polyester, neoprene, leather, nitrile rubbers, tires, etc
  • Shore D – ASTM E2240 – ISO 7619 – Cone 30° – Hard and rigid surfaces, ceramic and composites, acrylics, plexiglass, print rolls, cellulose, acetates, nylon, etc
  • Shore B – ASTM E2240 – Cone 30° – Medium values. As A scale for higher values.
  • Shore C – ASTM E2240 – Frustum 35° – Medium-hard values. As D scale for lower values.
  • Shore DO – ASTM E2240 – Ball 1.2 mm – From medium-hard to hard values. As B and C.
  • Shore O – ASTM E2240 – Ball 1.2 mm – Low values and very flexible materials. As A scale for low values.
  • Shore OO – ASTM E2240 – Ball 1.2 mm – Very soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon
  • Shore E – ASTM E2240 – Ball 2.5 mm – Very soft rubbers, natural rubber, elastomers, casting resin, soft PVC, leather, etc.
  • Shore M – ASTM E2240 – Cone 30° – As A scale, for thin specimens and elastomer materials.
  • Shore 000 – ASTM E2240 – Ball 6.35 mm – Ultra-soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon.
  • Shore 000-S – ASTM E2240 – Ball 10.7 mm – Ultra-soft rubbers, viscoelastic polymers.

FEATURED PLASTIC AND RUBBER HARDNESS TESTERS

IRHD and Shore hardness tester - affri hardness testers

MICRODAKO

Plastic and Rubber
Fully motorized IRHD and Shore hardness tester for rubber and plastic conform to ASTM 1415/ISO 48 international standards. Equipped with 5 hardness testing units on…
See more
irhd hardness tester - affri hardness testers

IRHD

Plastic and Rubber
IRHD and Micro IRHD Hardness tester for laboratory to measure plastic and synthetic fibers. Conform to ASTM 1415/ISO 48 international standards.
See more
Menu